FROM AERONAUTICS TO INDIVIDUAL MOBILITY: THE TRANSFORMATION OF 1946
The war, a radical watershed for the entire Italian economy, was equally important for Piaggio. The Pontedera plant built the state-of-the-art four-engine P 108 equipped with a 1,500-bhp Piaggio engine in passenger and bomber versions. However Piaggio’s aeronautical plants in Tuscany (Pontedera and Pisa) were important military targets and on August 31, 1943 they were razed to the ground by Allied bombers, after the retreating Germans had already mined the pillars of the buildings and irrevocably damaged the plants. To rebuild the Pontedera plants, Enrico Piaggio asked the Allies, who then occupied part of the grounds and of the buildings still standing, to arrange for the machinery transferred to Germany and Biella in northern Italy to be brought back. This was done rapidly and Armando and Enrico Piaggio then began the process of rebuilding. The hardest task went to Enrico, who was responsible for the destroyed plants of Pontedera and Pisa.
Enrico Piaggio’s decision to enter the light mobility business was based on economic assessments and sociological considerations. It took shape thanks to the successful co-operation of the aeronautical engineer and inventor Corradino D’Ascanio (1891-1981).
THE BIRTH OF A LEGEND
The Vespa (which means “wasp” in Italian) was the result of Enrico Piaggio’s determination to create a low cost product for the masses. As the war drew to a close, Enrico studied every possible solution to get production in his plants going again. A motor scooter was produced, based on a small motorcycle made for parachutists. The prototype, known as the MP5, was nicknamed “Paperino” (the Italian name for Donald Duck) because of its strange shape, but Enrico Piaggio did not like it, and he asked Corradino D’Ascanio to redesign it.
But the aeronautical designer did not like motorcycles. He found them uncomfortable and bulky, with wheels that were difficult to change after a puncture. Worse still, the drive chain made them dirty. However, his aeronautical experience found the answer to every problem. To eliminate the chain he imagined a vehicle with a stress-bearing body and direct mesh; to make it easier to ride, he put the gear lever on the handlebar; to make tyre changing easier he designed not a fork, but a supporting arm similar to an aircraft carriage. Finally, he designed a body that would protect the driver so that he would not get dirty or dishevelled. Decades before the spread of ergonomic studies, the riding position of the Vespa was designed to let you sit comfortably and safely, not balanced dangerously as on a high-wheel motorcycle.
Corradino D’Ascanio only needed a few days to refine his idea and prepare the first drawings of the Vespa, first produced in Pontedera in April 1946. It got its name from Enrico Piaggio himself who, looking at the MP 6 prototype with its wide central part where the rider sat and the narrow “waist”, exclaimed, “It looks like a wasp!” And so the Vespa was born.
On April 23, 1946 Piaggio & C. S.p.A. filed a patent with the Central Patents Office for inventions, models and brand names at the Ministry of Industry and Commerce in Florence, for “a motor cycle with a rational complex of organs and elements with body combined with the mudguards and bonnet covering all the mechanical parts”. In a short space of time the Vespa was presented to the public, provoking contrasting reactions. However, Enrico Piaggio did not hesitate to start mass production of two thousand units of the first Vespa 98 cc. The new vehicle made its society debut at Rome’s elegant Golf Club, in the presence of U.S. General Stone who represented the Allied military government. Italians saw the Vespa for the first time in the pages of Motor (March 24, 1946) and on the black and white cover of La Moto on April 15, 1946.
FIRST VESPA PATENT
On April 23, 1946 Piaggio & C. S.p.A. filed a patent with the Central Patents Office for inventions, models and brand names at the Ministry of Industry and Commerce in Florence, for "a motor cycle with a rational complex of organs and elements with body combined with the mudguards and bonnet covering all the mechanical parts". In a short space of time the Vespa was presented to the public, provoking contrasting reactions. However, Enrico Piaggio did not hesitate to start mass production of two thousand units of the first Vespa 98 cc. The new vehicle made its society debut at Rome's elegant Golf Club, in the presence of U.S. General Stone who represented the Allied military government. Italians saw the Vespa for the first time in the pages of Motor (March 24, 1946) and on the black and white cover of La Moto on April 15, 1946.
www.uk.vespa.com
Comments :
Post a Comment